Power & Temperature Display: 10~999W/ -9.9°C~+99.9°C
Fan Compatibility:
- 1 x 4-Pin(Supports fans with PWM function)
- 3 x 3-Pin(Supports fans with RPM output function)
Fan RPM Control:
- PWM Regulation Method (Fan PWM)
- Voltage Control Method (Fan No.1~3)
Output Current: MAX 0.7A per each channel
Output Voltage: +4~11VDC
Input Voltage: +12VDC/+5VDC
Front Panel:
- Power Load Meter: Displays Power Load between 10 ~ 999W. Readings of 1 ~ 9W are shown as "Lo" and readings of 1000W+ are shown as "Hi".
- Timer: Timer shows Computer usage time and resets when Computer is turned OFF.
- RPM Display: RPM is displayed in units of 10RPM. Values of 200RPM and below are shown as "0". Values between 201 ~ 6000RPM are supported by the display.
- Temperature Display: Displays temperatures between -9°C and 99C. Temperatures below -10°C are shown as "Lo". The Display will blink temperatures between 80 ~ 99.9°C and display "Hi" for temperatures above 99.9°C.
- Fan Channel Display.
- Jog Wheel: Jog Wheel is used for adjusting Fan RPM and selecting a Fan Channel. RPM can be set from 60 to 6000RPM in units of 60RPM.
Back Panel:
- Standard Fans (Fan 1~3): 3-Pin fans that support the RPM output function can be connected for use. PWM Fan: A 4-Pin fan that supports the PWM function can be connected for use.
- Temperature Sensor: Four temperature sensors can be connected.
- CVS Terminal: Receives the measured values of the CVS.
- Power Connector: Connects with the PSU's 4-Pin connector.
More information:http://www.tengdaelectronics.com/controller-for-pc/
